Grizzly G0614 Manual do Utilizador descarregar pdf (Página 23)

G0613/14 Swivel Mast Metal Cutting Bandsaw

-21-

Workstop

Your bandsaw has an adjustable workstop (Figure

14) that is easy to install and to use.

To install the workstop:

1. Thread the workstop rod in the base and

tighten the jam nut.

2. Slide the workstop onto the rod.

The vise

has a quick tighten/release lever and,

depending on the cut angle or workpiece shape,

you can remove or install the aluminium vise

clamp plate

(Figure 16) for additional holding

force.

Vise

Figure 16. Vise options and controls.

To use the vise:

1. Raise the bow and lock it in place by closing

the feed ON/OFF valve

(Figure 15).

Vise Lock Lever

Handwheel

Aluminum Plate

Figure 14. Workstop assembly.

3. Measure the distance from the blade to the

workstop, slide workstop to the needed posi

tion and tighten the lock lever.

Workstop Rod

Workstop

Lock

Lever

Jam Nut

Figure 15. Feed ON/OFF Valve.

Feed ON/OFF

2. Insert the workpiece between the jaws.

3. Use the handwheel

(Figure 16) to move the

jaws so they are within 1/8" from clamping

the workpiece

4. Use the vise lock lever to hold the workpiece

and quickly release the jaws to move the

workpiece after a cut.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 67 68

Comentários a estes Manuais

Sem comentários

Grizzly G0614 Manual do Utilizador Página 23

Comentários a estes Manuais

Manuais e produtos relacionados com Serras elétricas Grizzly G0614